#
# this config file was automatically generated
# using lirc-0.6.5(serial) on Sun Mar 31 04:22:18 2002
#
# contributed by henk@god.dyndns.org
#
# brand: e-tech   http://www.e-tech.nu
# model: noname (remote is slightly different from picture on web site)
# supported devices: e-tech TV-Card, e-tech TV-Radio-card (likely),
#	 fly98 clones (likely)
#
# This config is compatible with the FLY98-gpio version except for the
# REV and FWD keys that miss on my remote
#
begin remote
  name		FLY98
  bits		16
  flags		SPACE_ENC|CONST_LENGTH
  eps		30
  aeps		100

  header	9019  4474
  one           590  1656
  zero          590   532
  ptrail        578
  repeat	9020  4475
  pre_data_bits	26
  pre_data	0x1A1F2F
  gap		107852
  toggle_bit	0

      begin codes
	0			0x000000000000F00F
	1			0x000000000000C03F
	2			0x00000000000020DF
	3			0x000000000000A05F
	4			0x000000000000E01F
	5			0x00000000000010EF
	6			0x000000000000906F
	7			0x000000000000D02F
	8			0x00000000000030CF
	9			0x000000000000B04F
	CANCEL			0x000000000000F807
	ENTER			0x00000000000008F7
	MUTE			0x000000000000D827
	MOUSE_MODE		0x000000000000807F
	FULL_SCREEN		0x00000000000040BF
	CHANNELS		0x000000000000609F
	VIDEO			0x0000000000008877
	UP			0x000000000000708F
	DOWN			0x0000000000009867
#	LEFT			0x00000000000048B7 see CHAN_PLUS
	RIGHT			0x000000000000A857
	INC			0x00000000000050AF
	DEC			0x0000000000006897
#	CENTER			0x000000000000C837 see CHAN_MINUS
	ESC			0x00000000000058A7
	RETURN			0x00000000000018E7
	MENU			0x000000000000B847
	VOL_PLUS		0x00000000000028D7
	VOL_MINUS		0x000000000000E817
	CHAN_PLUS		0x00000000000048B7
	CHAN_MINUS		0x000000000000C837
	POWER			0x00000000000000FF
      end codes
end remote