# # this config file was automatically generated # using lirc-0.8.0(serial) on Tue Feb 27 17:48:18 2007 # # contributed by p.j. frantz # # brand: General Instrument # model no. of remote control: XRC-200 (in CABLE mode) # devices being controlled by this remote: Technisat Airstar-HD5000-PCI # # Note: Of the 4 different modes (AUX VCR CABLE TV), only cable and tv work properly. # The cable mode uses all 42 buttons, but the tv mode only uses 30. # Apparently, differences in their respective [begin remote] sections preclude # combining the two. This remote works fine with the bundled Technisat receiver. # begin remote name XRC-200 bits 16 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 8905 4459 one 474 4471 zero 474 2246 ptrail 493 repeat 8919 2218 gap 98506 toggle_bit 0 begin codes CBL_HELP 0x4C0D CBL_POWER 0x5006 CBL_MUTE 0xF008 CBL_PAGE+ 0x5C0C CBL_PAGE- 0xDC04 CBL_LOCK 0x6809 CBL_EXIT 0x480B CBL_INFO 0xCC05 CBL_UP 0x2C09 CBL_LEFT 0x6C0E CBL_OK 0x8807 CBL_RIGHT 0xEC06 CBL_GUIDE 0x0C0B CBL_DOWN 0xAC01 CBL_MENU 0x9806 CBL_VOL+ 0xB00C CBL_VOL- 0x7004 CBL_LAST 0xC803 CBL_FAV 0xA805 CBL_CHAN+ 0xD00A CBL_CHAN- 0x3002 CBL_STOP 0x9C02 CBL_PAUSE 0xF800 CBL_PLAY 0x1C0A CBL_REW 0x7808 CBL_REC 0x8C03 CBL_FF 0xB804 CBL_A 0xE801 CBL_B 0xE40E CBL_C 0x1406 CBL_1 0x800F CBL_2 0x4007 CBL_3 0xC00B CBL_4 0x2003 CBL_5 0xA00D CBL_6 0x6005 CBL_7 0xE009 CBL_8 0x1001 CBL_9 0x900E CBL_0 0x0000 CBL_BYPASS 0x280D CBL_MUSIC 0x080F end codes end remote # # this config file was automatically generated # using lirc-0.8.0(serial) on Tue Feb 27 17:48:18 2007 # # contributed by p.j. frantz # # brand: General Instrument # model no. of remote control: XRC-200 (in CABLE mode) # devices being controlled by this remote: Technisat Airstar-HD5000-PCI # # Note: Of the 4 different modes (AUX VCR CABLE TV), only cable and tv work properly. # The cable mode uses all 42 buttons, but the tv mode only uses 30. # Apparently, differences in their respective [begin remote] sections preclude # combining the two. This remote works fine with the bundled Technisat receiver. # begin remote name XRC-200 bits 16 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 8905 4459 one 474 4471 zero 474 2246 ptrail 493 repeat 8919 2218 gap 98506 toggle_bit 0 begin codes CBL_HELP 0x4C0D CBL_POWER 0x5006 CBL_MUTE 0xF008 CBL_PAGE+ 0x5C0C CBL_PAGE- 0xDC04 CBL_LOCK 0x6809 CBL_EXIT 0x480B CBL_INFO 0xCC05 CBL_UP 0x2C09 CBL_LEFT 0x6C0E CBL_OK 0x8807 CBL_RIGHT 0xEC06 CBL_GUIDE 0x0C0B CBL_DOWN 0xAC01 CBL_MENU 0x9806 CBL_VOL+ 0xB00C CBL_VOL- 0x7004 CBL_LAST 0xC803 CBL_FAV 0xA805 CBL_CHAN+ 0xD00A CBL_CHAN- 0x3002 CBL_STOP 0x9C02 CBL_PAUSE 0xF800 CBL_PLAY 0x1C0A CBL_REW 0x7808 CBL_REC 0x8C03 CBL_FF 0xB804 CBL_A 0xE801 CBL_B 0xE40E CBL_C 0x1406 CBL_1 0x800F CBL_2 0x4007 CBL_3 0xC00B CBL_4 0x2003 CBL_5 0xA00D CBL_6 0x6005 CBL_7 0xE009 CBL_8 0x1001 CBL_9 0x900E CBL_0 0x0000 CBL_BYPASS 0x280D CBL_MUSIC 0x080F end codes end remote