#
# this config file was automatically generated
# using lirc-0.8.0(userspace) on Thu May 31 00:45:00 2007
#
# contributed by Matthias Gaertner
#
# brand:                                   RADIX
# model no. of remote control:             DTR-9000-Twin
# devices being controlled by this remote: Dual DVB-T Receiver
#
# Note: The "extra" key does not produce IR signals on my device.
#

begin remote

  name  Radix_DTR-9000-Twin
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9133  4348
  one           679  1561
  zero          679   435
  ptrail        663
  repeat       9076  2145
  pre_data_bits   16
  pre_data       0xFE
  gap          107730
  toggle_bit      0


      begin codes
          Power                    0x00FF
          Mute                     0x28D7
          1                        0xC03F
          2                        0x40BF
          3                        0x807F
          4                        0xE01F
          5                        0x609F
          6                        0xA05F
          7                        0xD02F
          8                        0x50AF
          9                        0x906F
          0                        0x708F
          Sound                    0x7887
          Audio-red                0xF00F
          Timer-green              0x926D
          Last-yellow              0x6897
          i-blue                   0x08F7
          EPG                      0x48B7
          TTX.                     0xA25D
          Subt.                    0x42BD
          Back                     0xA857
          Menu                     0x9867
          Exit                     0x20DF
          -                        0x22DD
          +                        0x12ED
          ArrowsDown               0x38C7
          ArrowsUp                 0xE817
          Up                       0x58A7
          Down                     0xD827
          Left                     0x8877
          Right                    0xB04F
          OK                       0x10EF
          Pause                    0x827D
          A/B                      0x02FD
          REC                      0xC23D
          REC_TIME                 0x629D
          STOP                     0xF807
          F1                       0x18E7
      end codes

end remote