#
# this config file was automatically generated
# using lirc-0.8.3(default) on Fri Dec 12 21:10:21 2008
#
# contributed by Kirk Erickson
#
# brand: RCA converter (ATSC tuner) box remote control
# model no. of remote control:  RCA-DTA800B1
#
# Tested with the USB MCE ir receiver:
# 	TopSeed eHome Infrared Transceiver (HA type)
# 	RC6 IR protocol
#

begin remote

  name  RCA_DTA800B1
  bits           24
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       4062  3862
  one           568  1909
  zero          568   921
  ptrail        551
  gap          63995
  toggle_bit_mask 0x0

      begin codes
          up                       0x7598A6
          left                     0x7568A9
          right                    0x7578A8
          down                     0x7588A7
          ok                       0x7F480B
          menu                     0x7088F7
          info                     0x73C8C3
          prev                     0x72D8D2
          next                     0x72C8D3
          1                        0x7318CE
          2                        0x7328CD
          3                        0x7338CC
          4                        0x7348CB
          5                        0x7358CA
          6                        0x7368C9
          7                        0x7378C8
          8                        0x7388C7
          9                        0x7398C6
          0                        0x7308CF
          pgm                      0xFE101E
          cc                       0x76189E
      end codes

end remote


begin remote

  name  RCA_DTA800B1_SONY
  bits           12
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       2500   450
  one          1281   477
  zero          685   477
  gap          63995
  toggle_bit_mask 0x0

      begin codes
          tv                       0xA90
          input                    0x910
          mute                     0x290
          vol+                     0x490
          vol-                     0xC90
      end codes

end remote