#
# This config file was generated using lirc-0.8.2 with LIRC serial recceiver 
# on Beaujolais Day 2007 (Nov. 15th 2007)
#
# Contributed by: Lothar Wiemann (lothar.wiemann [at] arcor.de)
#
# Brand:        T+A
# Remote Model: F 100
# Notes: 	If building a LIRC serial receiver:
#		T+A remotes use a carrier frequency of 31.25 kHz.
#		IR-receivers with 30...33 kHz will work best (eg. Vishay TSOP 1730)
#		Std. 38 kHz receivers not recommended
#		-----------------------------------------------------------------------
#		The F100 uses a modified bi-phase code with header, start-bit, 9 data-bits, no toggle bits.
#		The HEADER is 512us pulse / 2560 us pause
#		The START bit is NOT bi-phase-coded ! It has a length of 1024us pulse / no pause (plead) 
#		The DATA bits are standard bi-phase with 512us pulse/512us pause (one) or  512us pause/512us pulse (zero)	
#
#		Enjoy
#		------------------------------------------------------------------------
#

begin remote

  name  lircd.conf
  bits            9
  flags           RC5|CONST_LENGTH
  eps             5
  aeps            192

  header          512  2560
  one             512   512
  zero            512   512
  plead           1024
  gap             130000
  min_repeat      1
  toggle_bit_mask 0x0

      begin codes
          ON_OFF                   0x1F7
          SCL                      0x15F
          DISC                     0x0E7
          A1/PH                    0x017
          A2/TV                    0x1C7
          A3/TUN                   0x147
          REC                      0x57
          1                        0x02F
          2                        0x1CF
          3                        0x14F
          4                        0x1EF
          5                        0x1B7
          6                        0x27
          7                        0x77
          8                        0x177
          9                        0x037
          0                        0x1E7
          <>                       0x06B
          Note                     0x09F
          SRND                     0x047
          Speaker                  0x167
          VOL+                     0x1FF
          VOL-                     0x0FF
          UP                       0x5F
          DOWN                     0xAF
          LEFT                     0x12F
          RIGHT                    0xD7
          OK                       0xCF
          |<<                      0x199
          <<                       0x1A9
          >>                       0x1A1
          >>|                      0x191
          Record                   0x141
          Back/RPT                 0x4F
          STOP                     0xDF
          PLAY/PAUSE               0x16F
          SYS_Menu                 0x139
          VID_Menu                 0x73
          AUD_Menu                 0x1AF
          SRC_Menu                 0x107
          RED                      0x1AB
          GREEN                    0x1B3
          YELLOW                   0x1C3
          BLUE                     0x1CB
          LIST                     0x1BB
          STORE                    0x10F
          (i)                      0x1A3
          View                     0x1BF
          F1                       0x6F
          F2                       0x1DB
          F3                       0x1A7
          F4                       0x193
      end codes

end remote