# # this config file was automatically generated # using lirc-0.8.2(default) on Wed Jun 18 00:28:38 2008 # # contributed by Jack Mudge # # brand: ??? # model no. of remote control: ??? # devices being controlled by this remote: A lightbulb from Thinkgeek.com # Another one like it can be found http://www.thinkgeek.com/gadgets/lights/831e/ # # Note: I also have a Haier air conditioner, and it's "Power" button happens # to correspond to the W button on this remote. I haven't configured # the Haier remote yet. # # Naming Scheme # ============== # Because most of the buttons on this remote are colored, and not named, and # because I don't want to confuse anyone by calling these "blue 1" and "blue 2", # I decided instead to number the unnammed ones according to the column they are in. # The column is named by the letter in the button right above it (R, G, B, or W), and # the number is the row, starting from that row with the letters, down to R5...W5. # I'm using the same name as the buttons with names for any button with names. # begin remote name Lightbulb bits 16 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 9088 4480 one 640 1664 zero 640 640 ptrail 640 pre_data_bits 16 pre_data 0x2FD gap 112006 toggle_bit_mask 0x0 begin codes Setup 0x18E7 Cancel 0x30CF Off 0xA857 On 0x38C7 Flash 0x8877 Strobe 0xF00F Fade 0xC837 Smooth 0x08F7 R1 0x807F R2 0x20DF R3 0xE01F R4 0x50AF R5 0xB04F G1 0x40BF G2 0xA05F G3 0x10EF G4 0xD02F G5 0x708F B1 0xC03F B2 0x609F B3 0x906F B4 0xE817 B5 0xB847 W1 0x9867 W2 0xF807 W3 0xD827 W4 0x7887 W5 0x58A7 end codes end remote