# # this config file was automatically generated # using lirc-0.7.0pre2(serial) on Thu Dec 25 20:14:13 2003 # # contributed by Steve Williamson (cdwhistler@catsgomeow.com) # # brand: One-For-All # model no. of remote control: URC-6012w # devices being controlled by this remote: This is for a # Sony VCR and the code is 0033. I just cloned the vcr button to the sat # button and then set the code 0033. It lets you use almost all of the # buttons. # begin remote name URC-6012w bits 11 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 2447 573 one 1232 564 zero 633 564 ptrail 636 gap 45527 min_repeat 2 toggle_bit 0 begin codes Menu 0x0000000000000594 Guide 0x0000000000000034 Select 0x0000000000000454 Exit 0x00000000000002A4 UpArrow 0x0000000000000214 DownArrow 0x0000000000000614 LeftArrow 0x0000000000000234 RightArrow 0x0000000000000434 VolUp 0x0000000000000244 VolDown 0x0000000000000644 ChUp 0x0000000000000044 ChDown 0x0000000000000444 Mute 0x0000000000000564 One 0x0000000000000004 Two 0x0000000000000404 Three 0x0000000000000204 Four 0x0000000000000604 Five 0x0000000000000104 Six 0x0000000000000504 Seven 0x0000000000000304 Eight 0x0000000000000704 Nine 0x0000000000000084 Zero 0x0000000000000484 Enter 0x0000000000000684 Play 0x00000000000002C4 Rew 0x00000000000006C4 Fwd 0x00000000000001C4 Stop 0x00000000000000C4 Pause 0x00000000000004C4 Prev 0x00000000000000A4 Rec 0x00000000000005C4 Power 0x0000000000000544 end codes end remote