# # this config file was automatically generated # using lirc-0.8.2(default) on Mon Nov 5 00:07:56 2007 # # contributed by Dragos Petraru # # brand: Universal Remote Controller # model no. of remote control: URC22B-15in1 # devices being controlled by this remote: TV1 TV2 AUX(PC) VCR1 VCR2 CBL SAT # # Note: To use all buttons you must SET the remote code for AUX to 123 and not 552 witch is the default. # The below configuration is for AUX with code 123 only. begin remote name URC22B-15in1 bits 16 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 8078 3935 one 500 1461 zero 500 492 ptrail 510 repeat 8077 1989 pre_data_bits 16 pre_data 0x1CE3 gap 91636 min_repeat 1 toggle_bit_mask 0x0 begin codes power 0x08F7 1 0x807F 2 0x40BF 3 0xC03F 4 0x20DF 5 0xA05F 6 0x609F 7 0xE01F 9 0x906F 8 0x10EF 10/0 0x00FF 1-/11 0x50AF 2-/12 0x7887 Memo 0xD827 ->.<- 0x48B7 contrast+ 0x22DD contrast- 0xA25D brightness+ 0xE817 brightness- 0x18E7 color+ 0xA857 color- 0x6897 CH+ 0xD02F CH- 0x30CF Ch*P/C 0xB04F Pr<> 0xF807 -[>] 0x38C7 TP> 0xAA55 << 0xB24D > 0x6A95 >> 0x2AD5 <|100i 0x8A75 E 0x926D F 0x52AD G 0xD22D H 0x32CD Vol+ 0xC837 Vol- 0x28D7 Mute 0x8877 3> 0x4AB5 ^ 0x0AF5 * 0xF20D TxtTV|| 0x629D [] 0x728D end codes end remote